Strange attractorsAttrattori strani
Three differential equations for the motion of a point in space, each
with a product or a sine in it, are enough for a motion that never repeats and never settles: two
trajectories that start as close as one likes separate exponentially, yet both stay on the same
bounded set, the attractor, which is a fractal of dimension a little above 2. Here a trajectory is
integrated by the fourth-order Runge-Kutta method, after a transient that brings it onto the
attractor, and printed as a tube; where it passes close to itself the tube fuses into one
solid.
Tre equazioni differenziali per il moto di un punto nello
spazio, ciascuna con un prodotto o un seno, bastano per un moto che non si ripete e non si ferma
mai: due traiettorie che partono vicine quanto si vuole si separano in modo esponenziale, eppure
restano entrambe sullo stesso insieme limitato, l'attrattore, che è un frattale di dimensione poco
sopra 2. Qui una traiettoria è integrata con il metodo di Runge-Kutta del quarto ordine, dopo un
transitorio che la porta sull'attrattore, e stampata come un tubo; dove passa vicino a se stessa
il tubo si fonde in un solo solido.
Download for 3D printingScarica per la stampa 3D
A 3D print of this attractorUna stampa 3D di questo attrattore
The trajectory above can be ordered as a 3D print: a tube
of the radius chosen, as wide as the size, fused to a plate by posts that rise to its lowest
turns. The request sends the link to the attractor as it is on the screen, with its parameters
and its time.
Puoi ordinare la traiettoria qui sopra come
stampa 3D: un tubo del raggio scelto, largo quanto la dimensione, fuso a una piastra da colonne
che salgono fino ai suoi giri più bassi. La richiesta manda il link all'attrattore così com'è
sullo schermo, con i suoi parametri e il suo tempo.
The tube as one closed solid, its trajectory as wide as the size,
fused to a plate by posts that rise to the lowest turns. Since the tube overhangs almost everywhere,
it needs supports (tree supports are usually the easiest to remove); a radius of at least 1 mm keeps it
from breaking when they come off.
Il tubo come un solo solido chiuso, con la traiettoria
larga quanto la dimensione, fuso a una piastra da colonne che salgono fino ai giri più bassi. Poiché
il tubo è a sbalzo quasi ovunque, servono i supporti (quelli ad albero di solito si tolgono più
facilmente);
un raggio di almeno 1 mm evita che si rompa quando si staccano.