Island carved by erosionL'isola scolpita dall'erosione

An island rises from the sea, pushed up by a slow uplift, and its rivers cut it down as it rises: the valleys, the ridges and the branching of the rivers come from one law of geomorphology, the stream power law, integrated on a grid as in the terrains of Cordonnier et al. (2016). Each seed gives another island; the tile can be printed as a relief on a base or as a lithophane, a thin plate that shows the island when held against the light.

Un'isola sale dal mare, spinta da un lento sollevamento, e i suoi fiumi la incidono mentre sale: le valli, le creste e la ramificazione dei fiumi vengono da una sola legge della geomorfologia, la legge della potenza della corrente, integrata su una griglia come nei terreni di Cordonnier et al. (2016). Ogni seme dà un'altra isola; la piastrella si stampa come rilievo su una base o come litofania, una lastra sottile che mostra l'isola tenuta controluce.

The tile that is printed; drag to turn, use the wheel or pinch to zoom.La piastrella che si stampa; trascina per ruotare, usa la rotella o il pizzico per lo zoom.

Uplift against riversSollevamento contro fiumi

The height h of the ground changes as dh/dt = U − K Am |∇h|, where U is the uplift (a few bumps from the seed, roughened by noise; where U is zero there is sea, held at height 0), A is the drainage area, i.e., the area of the land whose water flows through the point, and the second term is the incision of the river bed, larger where more water flows and the slope is steeper. With n = 1 (the power of the slope) the step can be taken implicitly along the flow, from the sea upwards, as hi ← (hi + Δt U + F hr)/(1 + F) with F = K Δt Am/L, where r is the cell into which i drains and L their distance: this is the O(n) scheme of Braun and Willett (2013), stable for any time step, on which Cordonnier et al. build their terrains.

L'altezza h del terreno cambia secondo dh/dt = U − K Am |∇h|, dove U è il sollevamento (alcune gobbe date dal seme, rese irregolari dal rumore; dove U è zero c'è il mare, tenuto ad altezza 0), A è l'area drenata, cioè l'area della terra la cui acqua passa per il punto, e il secondo termine è l'incisione del letto del fiume, più forte dove passa più acqua e la pendenza è maggiore. Con n = 1 (la potenza della pendenza) il passo si può fare in modo implicito lungo il flusso, dal mare in su, come hi ← (hi + Δt U + F hr)/(1 + F) con F = K Δt Am/L, dove r è la cella in cui scola i e L la loro distanza: è lo schema O(n) di Braun e Willett (2013), stabile per qualunque passo di tempo, su cui Cordonnier et al. costruiscono i loro terreni.

The water is routed at every step by a priority flood from the sea (Barnes et al. 2014): the cells are reached from the coast in order of height, and each one drains into the cell from which it was reached, so that the water crosses the hollows instead of stopping in them (a cell below its receiver is a lake and is not eroded). The rivers drawn on the map are the cells whose drainage area exceeds the share chosen above, wider downstream, which is the hydrological reading of a terrain used by Génevaux et al. (2013) to generate it from its rivers. A small diffusion of the slopes rounds the ridges. The preview has 128 cells a side and the print 192 or 256, so the rivers of the print follow the same valleys with somewhat more detail.

L'acqua è instradata a ogni passo da un'inondazione con priorità a partire dal mare (Barnes et al. 2014): le celle sono raggiunte dalla costa in ordine di altezza, e ognuna scola nella cella da cui è stata raggiunta, così l'acqua attraversa le conche invece di fermarcisi (una cella più bassa del suo ricevitore è un lago e non viene erosa). I fiumi disegnati sulla mappa sono le celle la cui area drenata supera la quota scelta sopra, più larghi verso valle, che è la lettura idrologica di un terreno usata da Génevaux et al. (2013) per generarlo a partire dai suoi fiumi. Una piccola diffusione dei pendii arrotonda le creste. L'anteprima ha 128 celle per lato e la stampa 192 o 256, quindi i fiumi della stampa seguono le stesse valli con un po' più di dettaglio.

Download for 3D printingScarica per la stampa 3D

A 3D print of this islandUna stampa 3D di quest'isola

The island can be ordered as a 3D print, as a relief or as a lithophane to hang in a window. The request sends the link to the island as it is on the screen.

Puoi ordinare l'isola come stampa 3D, in rilievo o come litofania da appendere a una finestra. La richiesta manda il link all'isola così com'è sullo schermo.

A square tile, flat underneath, printed without supports. As a relief, the sea is the base and the highest peak stands at the height chosen above it. As a lithophane, the plate is 0.8 mm thick on the sea and 3.2 mm on the highest peak, whatever the field of the highest peak says, so that against the light the sea shines and the mountains are dark; it is best printed in white at 100% infill (or upright, for finer steps).

Una piastrella quadrata, piatta sotto, che si stampa senza supporti. In rilievo, il mare è la base e il picco più alto sta all'altezza scelta sopra di essa. Come litofania, la lastra è spessa 0.8 mm sul mare e 3.2 mm sul picco più alto, qualunque sia il campo del picco più alto, così controluce il mare brilla e le montagne sono scure; conviene stamparla in bianco al 100% di riempimento (o in piedi, per gradini più fini).