Polytopes of four dimensionsPolitopi a quattro dimensioni

In the plane there are infinitely many regular polygons, in space five regular solids, and in four dimensions six regular polytopes, bounded by regular solids that meet three or more at every edge: the 5-cell, the tesseract, the 16-cell, the 24-cell, which has no analogue in any other dimension, the 120-cell and the 600-cell. Their vertices lie on the 3-sphere; here they are turned in four dimensions, in the planes that mix the fourth coordinate \(w\) with the other three, and then projected into space, as a cube is drawn on paper, either in perspective from a point on the \(w\) axis or stereographically from the pole of the 3-sphere.

Nel piano i poligoni regolari sono infiniti, nello spazio i solidi regolari sono cinque, e in quattro dimensioni i politopi regolari sono sei, delimitati da solidi regolari che si incontrano a tre o più su ogni spigolo: il 5-celle, il tesseratto, il 16-celle, il 24-celle, che non ha analoghi in nessun'altra dimensione, il 120-celle e il 600-celle. I loro vertici stanno sulla 3-sfera; qui vengono ruotati in quattro dimensioni, nei piani che mescolano la quarta coordinata \(w\) con le altre tre, e poi proiettati nello spazio, come si disegna un cubo su un foglio, in prospettiva da un punto dell'asse \(w\) oppure stereograficamente dal polo della 3-sfera.

The solid that is printed, at the resolution of the view; while a turn in 4D is dragged, and until the solid is ready, the edges are drawn as lines. Drag to turn in space, use the wheel or pinch to zoom.Il solido che si stampa, alla risoluzione della vista; mentre si trascina una rotazione in 4D, e finché il solido non è pronto, gli spigoli sono disegnati come linee. Trascina per ruotare nello spazio, usa la rotella o il pizzico per lo zoom.

The polytopeIl politopo

Schläfli symbolsimbolo di Schläfli
verticesvertici
edgesspigoli
facesfacce
cellscelle

Ludwig Schläfli found the six regular polytopes of four dimensions around 1852, in a work that was published only in 1901, after his death; Washington Irving Stringham found them again in 1880 and published the first drawings of them, and Victor Schlegel gave in 1886 the projection that bears his name, from a point just beyond one cell, which then encloses all the others. The 120-cell and the 600-cell, with 120 dodecahedra and 600 tetrahedra, are dual to each other, as the cube and the octahedron are.Ludwig Schläfli trovò i sei politopi regolari a quattro dimensioni attorno al 1852, in un lavoro pubblicato solo nel 1901, dopo la sua morte; Washington Irving Stringham li ritrovò nel 1880 e ne pubblicò i primi disegni, e Victor Schlegel diede nel 1886 la proiezione che porta il suo nome, da un punto appena oltre una cella, che allora racchiude tutte le altre. Il 120-celle e il 600-celle, con 120 dodecaedri e 600 tetraedri, sono duali l'uno dell'altro, come il cubo e l'ottaedro.

With a cell towards the eye and no turn, the perspective is a Schlegel diagram. The stereographic projection preserves angles, and therefore the edges (arcs of great circles on the 3-sphere) become arcs of circles; however, it enlarges by \(1/(1-w)\) near the pole, and the struts are thickened by the same factor (at most twice), so as to look roughly as they would on the sphere.Con una cella verso l'occhio e senza rotazioni, la prospettiva è un diagramma di Schlegel. La proiezione stereografica conserva gli angoli, e quindi gli spigoli (archi di cerchio massimo sulla 3-sfera) diventano archi di cerchio; vicino al polo, però, ingrandisce di \(1/(1-w)\), e le aste sono ispessite dello stesso fattore (al massimo il doppio), per apparire più o meno come sarebbero sulla sfera.

Download for 3D printingScarica per la stampa 3D

A 3D print of this polytopeUna stampa 3D di questo politopo

The polytope as it is on the screen, turned and projected, can be ordered as a 3D print: struts and balls fused into one piece, as wide as the size, standing on a flat cut under its lowest ball or on a disc. The middle of the 120-cell and of the 600-cell, where the projection shrinks the edges most, fuses into a knot of struts below about 100 mm. The request sends the link to the scene as it is.

Puoi ordinare il politopo così com'è sullo schermo, ruotato e proiettato, come stampa 3D: aste e sfere fuse in un solo pezzo, largo quanto la dimensione, appoggiato su un taglio piano sotto la sfera più bassa o su un disco. Il centro del 120-celle e del 600-celle, dove la proiezione accorcia di più gli spigoli, si fonde in un groviglio di aste sotto i 100 mm circa. La richiesta manda il link alla scena così com'è.

Struts and balls as one closed solid, as wide as the size, standing on a flat cut under its lowest ball or strut, or on a disc into which that is sunk. A cage of struts has overhangs in any orientation, and therefore it is printed with supports (tree supports come off more cleanly), with struts of radius at least 1.2 mm for a 0.4 mm nozzle. The middle of the 120-cell and of the 600-cell, where the projection shrinks the edges most, fuses into a knot of struts below about 100 mm. The grid is coarser for the larger cages, which keeps a draft under about a million triangles.

Aste e sfere come un solo solido chiuso, largo quanto la dimensione, appoggiato su un taglio piano sotto la sfera o l'asta più bassa, o su un disco in cui questa affonda. Una gabbia di aste ha sbalzi in qualunque orientamento, e quindi va stampata con supporti (quelli ad albero si staccano più facilmente), con aste di raggio almeno 1.2 mm per un ugello da 0.4 mm. Il centro del 120-celle e del 600-celle, dove la proiezione accorcia di più gli spigoli, si fonde in un groviglio di aste sotto i 100 mm circa. La griglia è più rada per le gabbie più grandi, e questo tiene una bozza sotto il milione di triangoli circa.